Printing and pressing instructions for using TECKWRAP Printable Glitter Heat Transfer Paper:
Print the Design:
- This transfer paper is ONLY for the use with regular inkjet ink
- Place the white side facing up on high-quality print on plain paper.
- Use your preferred craft cutter and adjust settings applicable to that cutter.
- Ensure high-speed/bi-directional printing is off.
- Always do a test cut first. Once cut, weed out the excess parts you don’t want.
Use the Heat Transfer Mask:
- This step is only necessary for matte white and glow-in-the-dark designs, it will not work on the glitter transfer paper.
- The heat transfer mask is only required for very detailed and intricate designs.
Heat Your Press:
- Set your heat press to 155-165°C (311-329°F). Note that this is a guideline as every press is different. Test what works best with your heat press.
- Press on medium pressure
Prepare the Textile:
- Place your textile on the heat press and use a lint roller to remove any unforeseen lint.
- Cover with silicone paper to protect the textile and heat press.
- Pre-press for 5 seconds to remove any moisture.
Apply the Design:
- Place your design with the image facing up in the desired position.
- Cover with silicone paper and press for 15 to 20 seconds.
Remove the Mask and Silicone Paper:
- If a heat transfer mask was used, peel it off carefully.
- Remove the silicone paper. Be cautious as the textile may still be hot.
Washing & Storage for TECKWRAP Printable Heat Transfer Paper:
- Wait 48hours before washing
- Wash inside out in cold water
- Machine wash using mild detergent
- Avoid using products with bleach or aggressing cleaning agents
- DO NOT TUMBLER DRY
- Do not iron directly over print (iron inside out)
- Do not dry direction in the sun or hang inside out
https://www.youtube.com/watch?v=N8T9p8GMjag
