Name: Sublimation Blanks : Siser Application Mask Tape
SKU: 2776
Availability: InStock

Sublimation Blanks : Siser Application Mask Tape

(incl. VAT)

Includes: A4 and A3 size sheets — pack of 5.

Sheets are reusable (please check for any ink residue from previous prints).

Siser T.T.D. Evolution application mask tape is recommended for easy transfer when using Siser EasySubli vinyl or Siser EasyColor (for inkjet ink). You may also use our in‑house INHOUSE TRANSFER TAPE, which provides a stronger grip on the image.

Store application tape in a cool, dry place to maintain its tack.

Application Instructions:

Cut a piece of masking tape slightly wider than the image.
Remove the paper backing from the mask and set it aside.
Place the mask adhesive‑side up on a smooth, firm surface.
With the image facing down, center it over the mask, allowing the middle to adhere first, then lower the rest of the image.
Hold your squeegee at a 45‑degree angle and, using firm pressure, push from the center outward to remove trapped air and bond the image to the mask.
Lift a corner and slowly separate the mask from the image using a steady motion.
Place the transferred image onto the shiny side of the original masking paper you set aside.

Title	Range	Discount
Global discount 2.5% Units of 25 to 49 units	25 - 49	2.5% R138.05
Global discount 5% Units of 50 to 100 units	50 - 99	5% R134.51
Global discount 10% Units of 100+	100 +	10% R127.43

SIZE

Clear

Size A4 Size (21 x 29 cm) – pack of 5 for R150. Sheets can be reused (please check for ink residue from last print).

Siser T.T.D. Evolution (application mask tape) to be used for ease of transfer with Siser easy subli vinyl .

Keep the application tape in a cool dry location so as to not reduce its tack.

Cut a piece of mask slightly wider than the image to cover
Remove the paper backing from the mask and set aside
Adhesive side up, place the mask down on a smooth, firm surface
With the image facing down, center it over the mask letting the middle drop down onto the adhesive, followed by the rest of the image.
Place your squeegee at a 45 degree angle over the center of the image. Using firm pressure, push the squeegee towards the outer edge of the image. This removes any trapped air creating a bond between the image and the mask.
Lift a corner of the mask, use a steady motion to separate the mask from the image
Place the transferred image back on the shiny side of the original masking paper you had set aside.