Epoxy Art : 3 : 1 Rapid Dry Poxi 1kg

R499.99

Our 3:1 Rapid Dry Poxi  is available in 1kg (750grm A and 250grm B) has a 2-3 Hour Curing Time*, anti-yellow, low odour, 10min pot life & mixes clear! 3011-J AB can be widely used for all kinds of crafts making, such as tumbler coating, necklace pendent bracelet, earrings (jewelry), small moulded items & can be applied to the coating of signs, cards, signage, nameplate and mould filling etc. This is  not mean for deep pour.

Epoxy resin 3011-J can be cured under normal temperature & high temperature with long operation time & fast curing. Very low viscosity, good flowing property & can be  natural defoamed, super yellow resistance, high transparency,  no ripple, bright in surface, it is a ultra clear crystal epoxy with wide range of applications.

2-3 hour curing time is subject to what you have applied underneath. Fast set epoxy is very sensitive to what you use underneath your artwork.  You will need to find the right product to use in combination with your fast set epoxy. Fast cure is also sensitive to direct heat & in moulds will flash cure* & destroy the mould.

*Flash curing is a controlled application of heat to speed up the chemical reaction between the resin and hardener. This can result in faster curing times, but it can also cause the resin to become too hot for the mould, which can damage the project and create toxic fumes. Flash curing can happen if the catalyst concentration is too high or not mixed properly.

14 in stock

Title Range Discount
Global discount 2.5% Units of 25 to 49 units 25 - 49 2.5%
Global discount 5% Units of 50 to 100 units 50 - 99 5%
Global discount 10% Units of 100+ 100 + 10%

CAUTION:

  1. The operating environment should be ventilate and should keep away from fire. Closely sealed after use.
  2. Avoid eye contact, in case of contact, wash with plenty of water and get medical attention immediately.
  3. If contact skin, wrap with clean cloth or paper & wash it with water & soap.
  4. Keep away from children.

STORAGE & LIFE SHELF:

  1. Store at the temperature of 25°C or cool & dry place. Avoid sunlight, high temperature or high humidity  environment.
  2. Use it up as soon as possible when opened. Do not expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room temperature of 25°C.

OPERATION:

  1. Weigh A (resin) and B (hardener) according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
  2. Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature). The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
  3. When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing, suggest using the heat curing.

 

You may also like…